To join the seagrass carpet yourself you’ll need a guide. It’s a fulfilling project, especially when you achieve a seamless finish. However, to make sure that you are not causing harm to the carpet materials, you need to be careful. I know it may be sounding tricky to you already but believe me. It’s not. I’m sure you’ll be able to understand by the time I’m finished.
Seagrass carpets are made from natural fiber carpets. They are highly popular for their durability and eco-friendly attributes.
A wall seagrass carpet you bought recently or your own homemade classic carpet, in this guide I’ll walk you through the process of the entire seagrass carpet joining thingy. First thing first, here are the steps You’re gonna need to follow –
- Prepare the Seagrass Carpet
- Measure and Cut the Carpet Pieces
- Apply Seam Sealer
- Join the Carpet Pieces
- Finish the Seams
I say that if you follow these through as I’m expecting you will then I’m confident that the natural texture and aesthetic appeal of your rug will not perish. After all, making your living space more comfy and beautiful is my ultimate goal. For the outcome, you need to make sure that the installation of your seagrass rug is a long-lasting one.
What you’ll find here is
Table of Contents
Can You Join Seagrass Carpet by Yourself?
Yes, you can join the seagrass carpet by yourself. I had coir carpets first but after knowing how useful these seagrass exotic carpets are I just had to try them out. I had some flat weave carpets of seagrass in my storage but they were smaller in size.
As a result, I decided to join them. Turns out that with the right tools and knowledge, this DIY project isn’t hard at all. In fact, when done correctly, the joined handmade carpets will blend smoothly preserving the charm of handmade fiber floors.
By the way, do you know, “The AWS Marketplace report says that the rug market is said to crack a biiig goal by reaching USD 120 billion by 2030, with a CAGR of around 5.5% 😱”
How to Join Seagrass Carpet?
To join a seagrass carpet that will look nice and good on your hardwood floor you’ll need to follow some very detailed steps. But not to worry, cause I’ve listed them in just 5 DIY steps of mine. Now of course the steps are rather easy.
But I hope you won’t make the mistake of ignoring any of these crucial steps.
And while going through the process I highly advise you to “Leave at least 2”-3” extra on all sides to counterattack the shrinkage attribute of seagrass rug.” Why you ask? Here’s why-
Also cleaning your entire subfloor is surely important. Especially if it’s for your concrete subfloors in a lavish commercial space.
Material You Need to Join Seagrass Carpet
To simplify your calculations I’m noting down the materials amount fit for a 100 sq/ft area. So, based on it just gather the materials you need and get set go…
Joining The Seagrass Carpet
Now that you’ve reached this step I hope you’ve gathered all the material let’s not waste any more time and hope on to the task. Shall we?
Step 1: Prepare the Seagrass Carpet
First thing first, start by unrolling the seagrass carpet. Unrelated to if this project is gonna be for a simple level space or your family’s gathering space you need to be careful about the humidity. This is to let your carpet acclimate nicely and properly.
The Weekend says “Your room’s temperature should stay consistently 65% for at least 48 hours⏱️.” It confirms the best outcome as well as adding your beautiful seagrass rug’s lifespan.
And as I said in the first place this is also important to counterattack your seagrass carpets shrinkage.
Step 2: Measure and Cut the Carpet Pieces
Now when the acclimation is complete, take the carpet cutter or utility knife as your preference. Oh before that with precision measure the pieces of your eco-friendly carpet tiles with the measuring tape. Now follow along the measured size and cut it down with precision.
Remember here precision is a must. I advise that if needed use chalk to mark the area or your carpet before cutting it.
Step 3: Apply Seam Sealer
Being done with the crucial cutting part next is sealing. Take the adhesive aka seam sealer and apply it along the edges of the cut-down carpet pieces. This step will crucially help with the prevention of fraying, keeping your carpet fibers intact for the long run.
If you are well versed in what seagrass rug is then you might be wondering if this is unnecessary. But let me assure you. It’s not. The waxy coating of seagrass fibers makes them naturally resistant to fraying that’s true.
But, the sealer adds an extra layer of protection to your rug.
Hearst Newspaper says “You should normally be able to cover 7 sq/yd per gallon of adhesive.”
Step 4: Join the Carpet Pieces
Now lastly remainder is joining. For this, you need to overlap the carpet pieces by about 1/2 inch. Use the seam roller to press down on the seams, it makes sure that they are tightly joined and the seam remains invisible to your naked eyes.
This technique is mainly highly essential if your project is for a wall-to-wall carpet installation.
Step 5: Finish the Seams
For the finishing assurance you should continue this seam rolling the seams until they are firmly secured. By doing so you’ll be making sure that your favorite seagrass carpet pieces blend seamlessly.
I did my best to explain in a simpler way how can you complete the task. But some of you may still find it complicated without a visual explanation.
If I’m right then you can try this video for your better understanding –
Common Mistakes to Avoid in Joining Seagrass Carpet
Most people are for sure not very comfortable with their first DIY project of joining seagrass carpets. As a result 99% times the worst outcome is followed by these 3 common mistakes –
Frequently Asked Questions (FAQs)
How do you ensure a seamless look when joining seagrass carpets?
To ensure a seamless look when joining seagrass carpets you’ve got to make sure of precise cutting. After applying seam sealer, and using a carpet roller to press the seams tightly together is also effective and important.
Is it difficult to join seagrass carpet pieces?
No, it’s not difficult to join seagrass carpet pieces. But of course, with the right tools, such as a seam sealer and a carpet cutter that is. Not to mention, precision is surely the key to achieving a professional finish.
How long does it take to join the seagrass carpet?
Typically, it takes about 2-4 hours to join seagrass carpet in a standard room, including preparation and finishing.
Can you join the seagrass carpet in a patterned design?
Yes, joining seagrass carpets in a patterned design is possible but requires careful planning and precision to align the patterns perfectly.
Our Last Word
Joining seagrass carpets is really easy. But only if you have all the necessary materials ready for your disposal. But surely it would increase your home’s natural beauty. I’m sure if you’ve followed through with the project of how to join the seagrass carpet will be a success.
So, remember to follow the steps carefully, and your seagrass carpet will serve you well for years to come.
Leave a Reply